Disposal Of The Old Device - CASO DESIGN Dry-Aged Cooler 688 Mode D'emploi Original

Masquer les pouces Voir aussi pour Dry-Aged Cooler 688:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
Dew on the surface of
cabinet:
Liquid sound
Condensation formed inside
the cabinet
Error code E2
Error code E3
Error code E6
Attention
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
► Clean the metal shelves and the meat hooks with methylated spirits and
remove the remains of any meat from the equipment before you send the
equipment in.

20 Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials. However,
they also contain damaging substances, which were necessary for their functionality and
safety. If these were put in the non-recyclable waste or were handled incorrectly, they
could be detrimental to human health and the environment. Therefore, do not put your old
device into the non-recyclable waste under any circumstances.
► Utilise the collection point, established in your town, to return and recycle old electric and
electronic devices. If necessary, contact your town hall, local refuse collection service or
your dealer for information.
► Ensure that your old device is stored safely away from children until it is taken away:
Before you throw away your old refrigerator take off the doors and leave the shelves in
place, so that children may not easily climb inside.
The surface of Dry-Aged Cooler especially the glass door
appear some frost if item in a damp room. This is due to
the moisture in the air coming into contact with the
cabinet. Please wipe it away with dry cloth.
1 The sound of compressor when starts or stops working
2 The flowing sound of refrigerant in the refrigeration
system
3 The evaporating sound of refrigerant in the evaporator
Under the environment with high level of humidity or the
door of Dry-Aged Cooler has been left open for a long
period or opened frequently, wipe off the door and walls
and leave the door closed as long as possible.
Desired temperature is not reached.
If necessary defrost the device (Please follow the hints for
manual defrosting in chapter cleaning).
Opened door. If necessary check the contact of the door.
Water level is below minimum water level. Please fill
water into the water tank. If necessary check the sensor.
Please note
42

Publicité

Table des Matières
loading

Table des Matières