Sharp RS172 Mode D'emploi page 312

IMPORTANT SAFETY INSTRUCTIONS
b) The hinges and safety door latches; check to make
sure they are not broken or loose.
c) The door seals and sealing surfaces; ensure that they
have not been damaged.
d) Inside the oven cavity or on the door; make sure there
are no dents.
e) The power supply cord and plug; ensure that they
are not damaged.
2. Do not operate the oven with the door open or alter
the door safety latches in any way.
3. Do not operate the oven if there is an object between
the door seals and sealing surfaces.
4. Do not allow grease or dirt to build up on the door seals
and adjacent parts. Clean the oven at regular intervals
and remove any food deposits. Follow the instructions
for "Care and Cleaning'' on page GB-28.
5. Individuals with PACEMAKERS should check with their
doctor or the manufacturer of the pacemaker for pre-
cautions regarding microwave ovens.
To avoid the possibility of electric shock
1. Under no circumstances should you remove the outer
cabinet.
2. Never spill or insert any objects into the door lock open-
ings or ventilation openings. In the event of a spill, turn
off and unplug the oven immediately, and call an au-
thorised SHARP service agent.
3. Do not immerse the power supply cord or plug in water
or any other liquid.
4. Do not let the power supply cord hang over the edge of
a table or work surface.
5. Keep the power supply cord away from heated surfac-
es, including the rear of the oven.
6. Do not attempt to replace the oven lamp yourself or
allow anyone who is not an electrician authorised by
SHARP to do so. If the oven lamp fails, please consult
GB-9