Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
Mounting the outdoor sensor (optional)
Mount the sensor vertically on
an exterior wall, at least 6 inches
below any overhang. Choose a
location protected from direct
sunlight.
Error codes
Display
Description
LO
The indoor temperature is below 0°C (32°F).
HI
The indoor temperature is above 60°C (140°F).
- -
The temperature reading is currently unavailable or the sensor is defective.
E128
The wireless network setup must be redone.
E129
Attempting to connect incompatible wireless devices.
E130
Invalid address. Call customer assistance.
E134
Low signal strength. Move wireless device to a different location and try again.
E137
Maximum number of devices is exceeded.
E138
Make sure Connected light on EIM is flashing and you are 2+ feet away from EIM.
E152
Incorrect order. Make sure to link EIM to proper thermostat.
69-2472EF—03
Place sensor securely in bracket,
facing away from wall.
20
Publicité
Table des Matières
