BedJet VET-800NA Manuel D'utilisation page 12

IMPORTANT INSTRUCTIONS: USER OPERATING MANUAL
Specifications
 Voltage: 120V ONLY (Not a dual voltage device)
 Power Rating: 1500 watts
 Heating Element Rating: 1440 watts
 Amp Rating: 12.8 Amps
 Rated operating temperature range 0°C to 40°C.
 HEPA Air Filter Type: .3µ replaceable
 Recommended filter change: 6 months or 400 hours
 Thermal Sensors: 2, dual redundant with microprocessor error checking
 Temperature Regulation Accuracy: ±1.5 °C (as new)
 System Time to 38°C: ~16 seconds
 Dimensions: 17" x 10.3" x 5.8" high (not including hose outlet)
 Weight: 9 lbs. not including hose
 Hose length: 45" (hose extensions available)
 Remote Control Battery Type: AA x 2, alkaline type
Thermal Safety
The BedJet VET includes the most robust set of redundant safety features of any forced air animal
warmer currently on the market to prevent unintentional overheating. These features include:
 Easily set Auto‐shutoff times from 30 minutes to 4 hours
 Dual temperature sensors with microprocessor monitoring for error check — sensors are
averaged for temperature readings and must agree with each other or the system will log a
fault and shut down
 Dual microprocessors with error monitoring and watchdog functions
 3‐stage microprocessor monitored overheat protection that will shut down heat under the
following out of specification over‐temperature situations:
o Air exhaust measured at > 46°C for 120 seconds
o Air exhaust measured at > 53°C for 12 seconds
o Air exhaust measured at > 55°C for 1 second
 Mechanical thermostatic overheat switch located in air exhaust that will shut off power to the
heater as redundant safety feature to microprocessor monitoring failure
Revision 1.0
MODEL SKU: VET‐800NA
P a g e | 12