BedJet VET-800NA Manuel D'utilisation page 10

IMPORTANT INSTRUCTIONS: USER OPERATING MANUAL
Bluetooth Remote Control App
Pending release (target: Q1 of 2022), the BedJet VET App can control all
functions of the unit from a smartphone or tablet. Additional features in
the app not available with the wireless remote include:
Troubleshooting
Use this guide to address problems with your BedJet VET product. If problems cannot be resolved,
please contact Customer Service at info@bedjet.com or +1 (401) 404–5250. Do not return any
product requiring service without first obtaining a Return Authorization Number (RMA) and
shipping instructions.
BedJet VET Audible Notifications – What does the BEEP mean?
Issue

1 Beep
BedJet switched on or off

Any command received from the remote
control or App

3 Beeps Remote control learning/pairing function has
been successfully accomplished

5 Beeps
A system monitoring error has occurred

The BedJet will be non‐functional until resolved
Revision 1.0
MODEL SKU: VET‐800NA
 HEPA filter life showing hours left to changeout
 Live output air temperature readings
 Live auto‐shutoff timer readout and fan speed readout
 Firmware update check via WiFi
 Please note, the legacy BedJet VET V2 App currently available on
iOS is not compatible with the new model BedJet VET. This legacy
app can be identified by the older red/orange BedJet logo.
Indication Recommendation

This is normal operation

This indicates successful learning/pairing of a
remote control to the BedJet

Remote control has not been paired if 3 beeps
are not made

See diagnostic table below, can only be reset
from error state by unplugging for 30 seconds
P a g e | 10