General Description - Urmet 1067/020 Mode D'emploi

ENGLISH

GENERAL DESCRIPTION

1067/020 radio interface is able to perform a bidirectional 868,6375 MHz radio communication, with the
associated radio devices. By means of a 4 wires bus it could be connected to the Urmet, wired control
panel, allowing a mixed management of wired and wireless devices.
Each 1067/020 radio interface could manage up to:
Detectors (infrared [*] – Double technology - Door Contact)
CAUTION!
- [*] Infrared detectors with on-board camera cannot be used
- In this document there are only present some essential indications about product
- For further and detailed information, refer to the product details on the Urmet website.
MOUNTING
The interface, is a radio device, this extension should be installed carefully, taking into account all the
precautions typical of such installations.
The box must be positioned:

in an inner location which is neither a transition location,

in a location subjected to excessive sudden rises/falls in temperature,

in a location is protected by anti-burglar system,

far from electromagnetic fields.
BUS AND TAMPER CONNECTION
The interface can be connected on bus in a cascade, star or mixed way.
Expansion position along bus is not important.
Connect the interface to bus using terminals block "+"; "+D"; "D"; "-".
For wiring, use 4 lead screened cable (2 leads for power supply and 2 leads for data connection).
In counting out overall system absorption, also consider max consumption of the interface.
Connect the box Tamper to the Tamper input of the interface.
4
Device type
Siren
Remote Control
Led keypad
Maximum number
16
2
8
8
.
.
DS1067-094A