General Description - Urmet 1068 Guide Rapide

ENGLISH

GENERAL DESCRIPTION

The device is provided with:

4 indicator LEDs: 3 for system status and 1 for the alarm memory

2 alarm inputs
Available in the following colors:

1068/435: black front

1068/436: white front
The reader can be installed on Bticino Magic frames and on Bticino TT MATIX frames using the Bticino
adapter code A5374/1. The adapter is provided to allow installing the reader on Simon Urmet nea frames.
The reader may be inserted as point in the following wiring systems using optional adapter frames: Bticino
Living, Bticino Living Light / Bticino International / Gewiss Playbus / Vimar Idea / Vimar Plana (Ref.
1056/337), Bticino Axolute (Ref. 1033/036), Vimar Eikon (Ref. 1033/038). The reader is powered by the
bus, which connects it to the control panel and is configured by programming.
WARNING! This document provides only some essential product information.
Refer to 1067 and 1068 series control panel manuals for more detailed information.
The transponder readers can read transponder keys Ref. 1068/432.
The reader is provided with 4 LEDs for indicating system state and zones arming state.
The following states are assumed:
The zones are off
The zones are armed
Key not recognised
OPERATION
2
GREEN LED
Off:
On:
Blinking:
YELLOW LED
It assumes the following states:
On fixed:
Alarm stored or fault present
Blinking:
Presence of at least one open input in the system
Fast Blinking:
Key present
DS1068-002B