Kalorik BL 44440 Manuel D'utilisation page 8

This blender has 1 main knob and 2 switches as well as three presets to
choose from. An ON/OFF switch, a Pulse switch, a manual speed
control dial, and "Ice – Smoothie – Soup" modes.
ON/OFF
To turn on the blender, flip the ON/OFF switch to "ON". The
blender is now ready for use in any function.
After use, flip the power switch to "OFF".
This blender will not work in any function unless this switch is
turned on. You can also stop any functioning using this switch.
Speed controller
With the power switch flipped ON, turn the speed controller between its
minimum and maximum level according to desired speed. It is
generally recommended to start at slower speeds and gradually
increase if using its maximum capacity.
Do not operate for more than 2 minutes at a time. Allow the motor to
cool for 30 minutes before operating again.
Important: The device can only be operated if the central dial is initially
turned to position "OFF" and then turned to desired speed.
www.KALORIK.com
8
BL 44440 - 200917