Additional Functions - auna Blackwood Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Remove the plastic stylus protector. Detach the tone arm from the tone arm rest.
Switch to PHONO mode with the Function button. Adjust the rotation speed with the speed switch (26).
Put a record on! Move the tone arm towards the record, which will start spinning from a certain point on.
Lower the tone arm carefully onto the desired track. Place the tone arm on the tone arm rest at the end of
the record. Use the auto stop switch to toggle the auto-stop function on/off.
Insert a cassette into the tape slot. Playback starts automatically. Use the tape deck button to operate the
tape playback: Half pressed = fast forward; fully pressed = eject; button completely outside= Play (tape
inserted).
Connect external media players like CD playes, tablets etc. to the AUX IN socket, using a 3.5mm audio ca-
ble. Switch Function to AUX. Operate the play back with your external player.
Sleep: Press Sleep (18) "SLP-120" will shown on the LCD display (6). Keep pressing the button to adjust
the sleep timer in the order of 120 > 90 > 60 > 45 >... 15 minutes respectively.
The system will stop and go to standby mode automatically after running the selected time. To cancel
sleep mode, press Sleep until "SLP-off' is displayed and the icon disappears from the display.
Timer Switch to standby mode and press and hold the timer button (18) to enter timer settings. "SE-
LECT SOURCE" appears on the display.
Use Function to select the alarm source (DISC, USB or TUNER) and confirm your selection by
pressing Timer.
Next, adjust the alarm volume with the arrow buttons. Again, press Timer to confirm.
Finally, set the alarm time. Use the arrow buttons to set hour as well as minutes and confirm each
step by pressing Timer.
Please note: If no playable media (USB/CD) is found or no media is inserted, the device automatically
switches to FM mode and continues alarm by tuning in the station last listened to. Switch the device
off manually, to stop the alarm when it goes off.
To activate/deactivate the timer, press Sleep/Timer. An alarm clock icon on the display indicates
active alarms.
EQ presets: Press Preset EQ (22) repeatedly to toggle the pre-set equalizer settings FLAT - CLASSIC
ROCK - POP - JAZZ.
Turntable
Tape Deck
Aux

Additional functions

17
www.auna.de

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Deerwood1002915710029158

Table des Matières