Listo LVC 49L2B Notice D'utilisation page 50

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

p
aUse fUnCtIon
You can use the "Pause" function to add dishes during a wash, for example.
Press the "Start/Pause" button.
1.
Wait until the spray arm has finished rotating, then open the door.
2.
Add the desired dishes and close the door.
3.
Press the "Start/Pause" button again to continue the programme and the cycle
4.
will resume after a few seconds.
WARNING! Be very careful when opening the dishwasher door during washing as hot
steam or hot water could burn you !
p
rogramme IndICator lIghts
In stop or pause mode, the programme indicator light is on.
1.
During washing, the programme indicator light flashes.
2.
p
rogramme end
When the wash cycle is complete (programme indicator light is on), the appliance
1.
will beep for a few seconds.
Switch the appliance off by pressing the "On/Off" button.
2.
Open the dishwasher door.
3.
After each wash, check whether the filters need to be cleaned.
4.
WARNING!
Hot steam escapes when the door is opened. Wait a few minutes before unloading
the dishwasher: you will avoid burning yourself and you will get better drying
results.
Hot dishes are sensitive to shocks. Always allow the dishwasher to cool before
emptying it.
V.1.0
/ U
nloadIng
50

Publicité

Table des Matières
loading

Table des Matières