Listo LVC 49L2B Notice D'utilisation page 39

Before using your dishwasher for the first time:
A. Adjust the water softener.
B. Fill the tank with dishwasher salt.
C. Adjust the rinse aid dose.
D. Fill the dispenser with rinse aid.
E. Fill the dispenser with detergent.
F. Load the dishwasher.
a. a
djUstIng the water softener
In order to avoid limescale deposits on the dishes and in the dishwasher, dishes
•
should be washed with softened water.
Tap water with a hardness of more than 5°dH must be softened with a special
•
dishwasher salt to make it suitable for use in a dishwasher.
To find out the water hardness in your town, ask your local water company or check
•
it using a water hardness test strip.
Remove the test
Turn on the tap and
strip from the
let the water run for
packaging
about a minute.
Water softener adjustment procedure
1. Close the dishwasher door.
2. Press the "On/Off " button to turn the appliance on.
3. Within one minute after switching on the appliance, press and hold down the
"Start/Pause" button for 5 seconds to enter the setting mode.
4. Press the "Start/Pause" button one or more times to select the appropriate
setting for your water hardness. Refer to the table on the next page to select
setting 1, 2, 3, 4, 5 or 6.
5. If no button is pressed within 5 seconds, the setting mode is deactivated. Your
setting is saved.
N
: If you move, you will need to re-adjust the water hardness level to maintain
ote
washing efficiency.
BEFORE FIRST USE
1 minute
1 second
Hold the test strip in
water for about one
second
Remove the test
strip from the water
and shake it.
39
1 minute
Wait 1 minute.
The test strip
indicates the water
hardness level.
V.1.0