Reading Text; Reading Tables And Spreadsheets; Adjusting The Volume; Adjusting The Reading Speed - Optelec ClearReader+ Manuel D'utilisation

+
Optelec ClearReader

Reading text

Press the Scan button to capture and start reading a document positioned beneath the camera.
After pressing the Scan button, you will hear the snapshot sound and within a few seconds the
+
ClearReader will begin reading to you.

Reading tables and spreadsheets

To read tables, receipts and bank statements, press and hold the Scan button for more than 2
seconds until you hear a clicking sound. A long press of the Scan button will enable the Table
Reading mode and will disable the automatic column recognition, making
it possible to read across columns. Text will be read from left to right
ignoring column borders.

Adjusting the volume

Turn the Volume dial clockwise and release it to slightly increase the
volume of the reading voice. Alternatively, turn the dial counterclockwise
and release it to slightly decrease the volume. To rapidly adjust the
volume, turn and hold the dial to the end position. When releasing the dial
it will always move back to its start position.

Adjusting the reading speed

Turn the Speed dial clockwise and release it to slightly increase the
reading speed. Alternatively, turn the dial counterclockwise and release it
English Page 15