Flight Operation - Carson EASY TYRANN 180 Mode D'emploi

FLIGHT OPERATION

Trimming the quadcopter
Already shortly before the quadcopter takes off, you can recognize
whether it wants to turn or glide in a particular direction. Correct
the deviations from the vertical ascent with the trim knob of the
turn function.
Tip of the fuselage turns to the right:
• Reduce speed and push the trim slider of the turn function on
the left remote control lever stepwise to the left.
• Push the pitch-lever forward again and check whether the
correction was sufficient, if necessary shift the trim further to
the left.
• Repeat the process until the quadcopter no longer shows a
tendency to turn to the right.
It is best to fly only in closed rooms
• With sufficient free space in all directions
• On flat ground
• Without standing (furniture) or moving obstacles (persons,
animals)
• In rooms without air draught
If you want to fly outdoors, do this
• Only when there is no wind
Do not fly
• If you are exhausted or your reaction is impaired in any way.
• At wind-force 1 or greater.
• Keep your model away from high-voltage cables or radio
Tip of the fuselage turns to the left:
• Proceed as described above, but push the trim slider of the turn
function stepwise to the right.
masts. Never use the model in lightning storms. Atmospheric
disturbances can affect the signals of your remote controlling
transmitter.
• Near any obstacles such as buildings, furniture, persons and
animals.
• On public
roads
19 // GB