Fantech VHR 200R Manuel D'installation page 11

MOUNTING – WALL MOUNT
VHR200R - Optional
BRACKET MOUNTING KIT INCLUDES
• Mounting bracket, 1 pc
• Rubber vibration isolators, 4 pcs
• Screws, 4 pcs
• Washers, 4 pcs
• Safety screws, 2 pcs
1 Attach bracket to wall using 4 screws and
washers provided.
Washers need to be installed to
prevent screw head from going
through the grommet.
If using the 24" spacing, move the
vibration isolators.
2 Lift unit and slide into slots on the bracket
Safety screws
(included)
Place bumpers on
back of unit if not
already installed
(included)
3 Insert the safety screws on both sides to
secure the unit.
11