Holtex+ TysonBio TB100 Manuel D'utilisation page 8

Setting up the glucometer
9
First insert a battery and then press the reset button located at the back of the meter
and proceed with the following instructions.
Set date and time
1. Press the M button to enter the date/time mode. Press and release the S button to
choose "24hr" or "12hr" display. With your chosen clock setting, press the M button
and the year setting will appear. Press and release the S button at the correct year
appears. (Fig.1)
2. To enter the correct year and move on to the month, press the M button. To change the
month, press the S button.(Fig.2)
3. To enter the correct month and move on to the day, press the M
day, press the S button. (Fig.3)
4. To enter the correct day and move on to the hour setting, press the M
5. To change the hour, press the S button. To enter the correct hour and move on to change
the minutes, press the M
button. (Fig.4)
6. To change the minutes, press the S button. To enter the correct minutes and move on to
the alarm setting, press the M button.
M E M
Fig.1
button. To change the
Fig.4
Fig.2 Fig.3
8
button.
Fig.5
Fig.6