Holtex+ TysonBio TB100 Manuel D'utilisation page 3

About the glucometer
2
Your TysonBio TB100 Blood Glucose Monitoring System
These instructions are designed to guide you through the operation of the system with detailed
directions and pictures.
our starter kit contains:
•One glucometer
•One vial of test Strips (10)
•One lancing device
•Ten lancets
•One control solution
•One carrying case
•User manual
•Log book
•Quick reference guide
Note: 50 test strip vials can be purchased individually
TysonBio TB100 parts
3
1. Display – Your test results are displayed here. The large and
easy to read screen guides you through the test by using
numbers and symbols.
2. M Button - The M button is used to set time, alarm, enters the
memory mode to show the consecutive 7/14/30-day average
results and turns the meter ON and OFF.
3. S Button - The S (select/set) button is used to select year,
month, day, time, memory of results and control solution
mode.
4. Test port – This is where you insert the test strip into the meter.
5. Unit switch – Switch for unit of measurement – mmol/l or mg/dL.
1 mmol/l =18 mg/dL
6. Battery cover
7. Label
8. Reset button – Press this button to re-set the system
is made up of several components.
0000
0000
01
3