Your Fridja Steamer; How To Assemble - Fridja f1400 Mode D'emploi

YOUR F RIDJ A S TE AME R
1. Steamer head
2. Head hanger
3. Folding hanger
4. Telescopic pole
5. Hose
6. Trouser bar
7. Pole socket
8. Hose connector nut
9. Control panel
10. Water storage tank
11. Appliance water reservoir
(under water tank)
12. Drain plug
13. Rolling casters
14. Remote control handle
15. Hand ironing mat
16. Folding hanger
17. Clasp attachment
18. Upholstery brush
15
14
8
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
16
f1400 FRIDJA PROFESSIONAL GARMENT STEAMER
HOW TO A SSEMBL E
Carefully unpack all parts of the steamer including those in the
polystyrene packaging.
1. Insert the thicker end of the telescopic pole into the pole
socket (Fig. A).
2. Turn the pole nut clockwise until tightened.
3. Extend the telescopic pole fully, use clamps to tighten each
4. segment. Always keep pole at full height when steaming.
5. Screw the hose to the base and tighten the hose nut clockwise
6. (Fig. B).
7. Fit the head hanger to the top of the telescopic pole (Fig. C).
8. Insert two AAA batteries into remote control handle (Fig. D).
9. Hang the steamer head on the hanger head.
A
B C D
9