Kenmore 65702 Guide D'utilisation Et D'entretien page 15

17. Pull the loose end of the wire harness from opening
in the refrigerator top. Pull the loose end of the wire har-
ness and the ground wire from the opening in the top
of the refrigerator door. Being careful not to pinch the
wires, install the left-upper hinge and secure it
with the three bolts.
18. Connect the ground wire to the top hinge and secure
with screw. Connect the electronic wire on the top of the
refrigerator.
NOTE : If the housing connector is not reconnected, the
entire temperature display will not come on.
REFRIGERATOR INSTALLATION
15
WARNING
Do not damage the wires or connectors. Pinched or cut
wires or damaged connectors can result in electric shock,
fire, personal injury, and/or product failure.
19. Carefully install the top table over the wires and hinge
and secure with the three screws.
20. Check the door alignment, door opening, and
operation of the refrigerator and freezer lights by opening
the refrigerator and freezer doors.