IDEAL SureTrace 61-955 Mode D'emploi page 7

RC-955 Display
1. Bright, 2-digit LED display. (180° Rotating)
2. Displays the powered line status received
from the transmitter.
3. "0-99" numeric indication of
signal strength.
4. Indicator lights when audible tone
is disabled.
5. Peak detector shows instantaneous
changes in signal strength.
RC-959 Display
1. Super-bright OLED display (90° rotating).
2. Displays the powered line status received
from the transmitter.
3. Indicates On/Off status of the
audible tone.
4. Low Battery Indicator. Flashes
when 10% battery life remains.
5. "0-99" numeric indication of signal strength.
6. Displays the sensitivity setting.
7. Peak detector shows instantaneous changes in signal strength.
Additional Notes
• Sensitivity mode selection – general guidelines:
• Start out at maximum sensitivity (
test. If the receiver is too sensitive, then reduce the sensitivity using the
button until the receiver's display does not peg at "99" continuously.
• Use
adapter (rather than the 25' lead and a remote return path setup), (b) in open
circuits, (c) underground, (d) and anywhere else more signal detection is needed.
• Use
has signal saturation (display is pegging at "99" continuously).
• Use
remote return path, (b) and when previous mode has signal saturation of "99."
• Use Breaker
pinpointing individual wires from a bundle, (c) and when previous mode has
signal saturation.
mode for tracing: (a) in closed circuits while using the outlet plug
mode to reduce the level of sensitivity if the highest sensitivity range
mode for tracing (a) in closed circuits while using the 25' lead and a
mode for (a) identifying circuit breakers and fuses, (b)
2
3
4
2
3
) until the receiver finds the circuit under
Page 7
1 4 5
1
5 6 7