General Operation - 3B SCIENTIFIC PHYSICS 1012832 Instructions D'utilisation

4. Technical data
Inputs:
Connectors:
Internal resistance
"Start" input:
"Stop" input:
Edges for "Start"
and "Stop" inputs:
Trigger threshold for
"Start" input:
"Stop" input:
Display:
Display:
Measuring range:
Resolution:
Precision:
General data:
Voltage supply:
Dimensions:
Weight:
5. Care and maintenance
•
Before cleaning the equipment, disconnect it
from its power supply.
•
Use a soft, damp cloth to clean it.
6. Disposal
•
The packaging should be disposed of at
local recycling points.
•
Should you need to dispose of the equip-
ment itself, never throw it away in normal
domestic waste. Local regulations for the
disposal of electrical equipment will apply.
4-mm safety sockets
2.4 kΩ
5.6 kΩ
Rising
Low 0...0.5 V, high 1...5 V
Low 0...1 V, High 2...5 V
4-digit LED display
1...9999 ms
1 ms
Quartz precision
Plug-in power supply
12 V AC, 500 mA
100x75x35 mm³ approx
400 g approx. incl. plug-
in power supply
7. Operation

7.1 General operation

•
Connect a 12 V AC plug-in power to the
millisecond counter (4).
Connect both inputs (1 + 2) to ground (3).
•
Opening the "Start" input (1) (disconnecting
the ground) starts the measurement.
Measurement ceases as soon as the "Stop"
input (2) is opened.
The display will go back to displaying zero as
soon as both inputs are connected to ground
again.
Both inputs should be connected via normally
closed switches (see Fig. 1).
Fig. 1 Schematic diagram for connection of the
inputs
7.2 Set-up with free-fall apparatus
Additionally required:
1 Free fall apparatus
•
Connect the inputs (1, 2, 3) of the millisec-
ond counter to the 3 sockets of the free-fall
apparatus making you sure you match all
the colours (see Fig. 2).
•
Connect a 12 V AC plug-in power to the
millisecond counter (4).
Measurement starts as soon as the steel ball is
released from the start console and stops when
it hits the trap plate. Zero calibration is carried
out as soon as the steel ball is placed on the
start console. The timer is then ready to carry
out another measurement.
2
1000738