Gima OXY-200 Mode D'emploi page 61

Masquer les pouces Voir aussi pour OXY-200:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an electromagnetic site
survey should be considered. If the measured field strength in the location in which the
CMS70A is used exceeds the applicable RF compliance level above, the CMS70A
should be observed to verify normal operation. If abnormal performance is observed,
additional measures may be necessary, such as re-orienting or relocating the CMS70A.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3
V/m .
26

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cms70a35101

Table des Matières