Gima OXY-200 Mode D'emploi page 44

System setting
In the main menu interface, choose "System" item, then press menu button to enter the System
setting menu as figure 6:
A Volume:move the choice bar to the "Volume" item, then press left/right button to set the
volume (three levels,OFF means closing sound).
B Pulse sound:move the choice bar to the "Pulse sound" item, then press left/right button to set
pulse sound.
C key sound:move the choice bar to the "key sound" item, then press left/right button to set key
sound.
D Version:move the choice bar to the "Version" item,then press the menu button to see the
edition information of hardware and software,and return to the system setting menu interface
after 2 seconds .
E Equipment ID: see the ID information of device.The ID of the device can be set by the PC
software.Please refer to <SpO
F Factory Default: move the choice bar to the "Factory Default" item,then press the menu button
to pop-up "Factory Default" window.Press up/down button to choose whether to resume
Factory Default,and press menu button to affirm setting,then press return button to return the
system setting menu interface.
Display setting
In the main menu interface, choose "Display" item, then press menu button to enter the display
Figure 5. Main menu interface
Figure 6. System setting menu
Assistant user manual> for detail.
2
9