Gima OXY-200 Mode D'emploi page 47

A Record setting
a In the record menu interface, move the choice bar to "Record" item, then press left/right button
to choose on/off.When displaying "on",press menu button enter the input ID interface as
Figure 13. When recording, choose "off",and press menu button to stop recording.
b In "Input ID" interface,aglimmer cursor appears in the ID input box.The pink letter is the
selected letter in dummy keyboard.Press direction key to choose the letter to input and press
menu button to input.You can input 4 letters most. choose
delete letter.After inputting,choose
return to measure interface.
c If the inputed ID has existed,the prompt dialog box as figure 14 will appear.Choose "Yes" and
click menu button to replace the existed ID , at the same time begin to record and return to
the measure interface;choose "No" to return the "Input ID" interface.
Figure 12. Record Menu
Figure 13. Input ID interface
,then press menu button to begin to record data and
12
,then press menu button to