Publicité
Les langues disponibles
Les langues disponibles
Awaken and Shutdown
Pause: During the operation of the Robot, press the Robot key or "Pause"
button on the remote control to
pause the operation of the Robot.
Awaken: If the Robot stops working for more than ten minutes, it will
automatically enter sleep mode (all the Robot lights are off). You can wake
up the Robot by pressing the START / STOP button, or any button on the remote
control to restart.
Shutdown: After the Robot stops working, press the ON/OFF key for a long time.
When the indicator light of the Robot is off, it means the Robot is shut down.
*After the Robot finishes its work, it is recommended not to shut it down, so as
to keep it in a state of charge, in order to better carry out next time.
Time Scheduling Setting
Scheduling settings: Press the "Scheduling" button
on remote control
for a short time to set the daily programming.
After the setting is completed, the Robot will automatically clean up at the
scheduled time every day.
PS: Before scheduling setting, you need to set up the Robot time through
timing setting button
on remote control.
Remote Control
Avoid direct sunlight on the receiver of product, which may interfere with
good signal reception. In some cases with high brightness, it is
recommended to draw the curtains to avoid direct sunlight.
The transmitter of remote control must be directive towards the receiver
when pressing the buttons of the desired function.
Do not use different type of batteries or new and worn batteries
Never use rechargeable batteries in this remote
Remote the batteries if you do not require the use of your remote control for
a long time
EN-14
Publicité
