Publicité
Les langues disponibles
Les langues disponibles
During the cleaning process, the Robot can sense that its power is insufficient
and automatically enters "Back to Charge" mode" and automatically finds
the charging seat to charge. You can also command the Robot to enter
"Back to Charge" mode through the "Back to Charge" button
the remote control.
CHARGING ATTENTION
1. The charging seat cannot be used in environments with a strong reflection
such as direct sunlight and nearby mirrors. If there are any objects with
strong reflection, please the shift to 7 cm from the bottom minimum.
2. In order to ensure the normal working hours of the Robot, please fully
charge it before use.
Cleaning Operation
According to different cleaning needs, this product has a variety of cleaning
modes to choose from. You can start various cleaning modes through the
Robot, remote control.
Available cleaning modes:
- Automatic cleaning
- Cleaning with max power (for one-piece suction)
- Cleaning baseboards
Automatic Cleaning
1)
Cleaning mode: The most commonly used cleaning method is that the Robot
uses a bow-shaped path to plan and clean the whole house according to
the actual home environment.
Setting method: In the shutdown state, press ON/OFF hold the key, when the
indicator light of the Robot is on, this indicates that the Robot is powered on.
When the key is pressed for a short time, or press the automatic cleaning
bottom
on the remote control, the Robot starts automatic cleaning.
To enter the MAX power suction mode, Press the
EN-12
once more.
on
Publicité
