Section 1 Introduction And Safety Introduction; Safety Rules - Generac Small Pro Manuel De L'utilisateur

Masquer les pouces Voir aussi pour Small Pro:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section 1 Introduction and Safety
Introduction
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Thank you for purchasing a Generac Power
Systems Inc. product. This unit has been
designed
to
provide
efficient operation, and years of use when
maintained properly.
Read this manual thoroughly and understand
all of the instructions, cautions, and warnings
before using this equipment. If any section of
the manual is not understood, contact your
nearest
independent
dealer or contact Generac Customer Service
at 1-888-GENERAC (1-888-436-3722), or
www.generac.com
concerns.
The
owner
is
responsible
maintenance and safe use of the equipment.
Before operating, servicing or storing this
power washer:
• Study all warnings in this manual and on
the product carefully.
• Become familiar with this manual and the
unit before use.
• Refer to the
Assembly
manual for instructions on final assembly
procedures.
Follow
completely.
Save these instructions for future reference.
ALWAYS supply this manual to any individual
that will use this machine.
THE INFORMATION CONTAINED HEREIN
WAS
BASED
PRODUCTION
AT
PUBLICATION. GENERAC RESERVES THE
RIGHT TO MODIFY THIS MANUAL AT ANY
TIME.
Owner's Manual for Power Washer
(000100a)
high
performance,
authorized
service
with any questions or
for
proper
section of the
the
instructions
ON
MACHINES
THE
TIME

Safety Rules

The manufacturer cannot anticipate every
possible circumstance that might involve a
hazard. The warnings in this manual, and on
tags and decals affixed to the unit are,
therefore, not all inclusive. If using a
procedure,
technique that the manufacturer does not
specifically recommend, verify that it is safe
for others. Also make sure the procedure,
work method or operating technique utilized
does not render the equipment unsafe.
Throughout this publication, and on tags and
decals affixed to the power washer, DANGER,
WARNING, CAUTION and NOTE blocks are
used to alert personnel to special instructions
about a particular operation that may be
hazardous
carelessly. Observe them carefully. Their
definitions are as follows:
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
IN
OF
NOTE:
Notes contain additional information important
to a procedure and will be found within the
regular text of this manual.
These safety warnings cannot eliminate the
hazards that they indicate. Common sense
and
strict
instructions while performing the action or
service are essential to preventing accidents.
Introduction and Safety
work
method
or
if
performed
incorrectly
DANGER
WARNING
CAUTION
compliance
with
the
operating
or
(000001)
(000002)
(000003)
special
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7019 3100

Table des Matières