Bartscher 700475 Mode D'emploi page 35

•
Place the device in such a manner that there is a minimum of 10 cm between it and
other objects, including walls, in order to ensure proper air circulation.
•
Place the device in such a manner that the ventilation ducts are neither blocked or
covered.
•
Do not place the device where humidity or temperature are high as the device may
be damaged.
•
Do not drill holes in the device nor mount other objects to it.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
Power supply
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
•
Before connecting the device to the power supply for the first time and starting its
operation leave the device for at least 2 hours to let the cooling equilibrate to avoid
failures.
•
In the event of power supply cut or unplugging, do not plug in the device for at
least 5 minutes.
•
The electric socket should be provided with 16A circuit breaker. Only plug in directly
to the wall socket. You must not use any adapter or extension block.
- 31 -