Wellis Clement Guide D'utilisation page 5

Installing the toilet bowl
1. Determining the position of the
connection pipe: Insert the connection
pipe into the outlet opening of the
toilet bowl and fit the other end into the
opening of the waste water pipe stub.
Toilet bowl waste
water outlet
With the flexible S-connection pipe option available from Wellis, both bottom and rear connections
are possible.
3. Drill the fixing holes for the places marked on the floor and insert the dowels.
Dowel
4. Place the washers
on the hexagon socket
head screws and fix the
brackets to the floor.
Paneled wall
Waste water
connection
pipe
Eccentric toilet
connection
Waste water pipe
Hexagon socket
head screw
Bracket
5. Fit the toilet bowl to the
indicated location, while
ensuring that the mounting
brackets are connected to
the toilet bowl connector.
2. Use a pencil or template to mark the
location of the fixing screws for the toilet
bowl on the floor.
l l
W a
Template
Washer
Dowel
6. Place the washer rings
into the fixing holes and
secure the toilet bowl to
the support brackets.
EN
Location of fixing
screws
Fixing hole
Cover cap Washer ring
Screw