Method 2. Connecting Using An Optical Cable - Samsung HW-Q950T Manuel Complet

Masquer les pouces Voir aussi pour HW-Q950T:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• When connecting a Samsung TV that supports the eARC function, "eARC" appears on the
display and the sound is heard.
• If "TV ARC" does not appear in the display window of the Soundbar main unit, confirm that the
HDMI cable is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.
NOTES
• When you connect the TV that supports the HDMI ARC (Audio Return Channel) to the Soundbar
with an HDMI cable, you can transmit the digital video and audio data without connecting a
separate optical cable.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 0.55 inches (14 mm).
• This function is not available if the HDMI cable does not support ARC.
• When the audio in a broadcast is encoded in Dolby Digital and the "Digital Output Audio Format" on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the
setting on the TV is changed, you will experience better sound quality. (The TV menu may use
different words for Dolby Digital and PCM depending on the TV manufacturer.)

Method 2. Connecting using an Optical Cable

Pre-connection Checklist
• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
• When you use an optical cable and the terminals have covers, be sure to remove the covers.
OPTICAL OUT
Top of the Soundbar
Optical Cable
(not supplied)
D.IN
ENG - 21
Bottom of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
HDMI 1
HDMI 2

Publicité

Chapitres

Table des Matières
loading

Table des Matières