Led Indicator Lights On The Rear Of Subwoofer And Surround Speakers - Samsung HW-Q950T Manuel Complet

4. Check if the LINK LED is solid blue (connection complete).

LED Indicator Lights on the Rear of Subwoofer and Surround Speakers

LED
Blue
Red
Red and blue
LINK LED - Blue is On
Status
Successfully connected
On
(normal operation)
Recovering the
Blinking
connection
Standby (with the
Soundbar main unit
turned off)
On
Connection failed
Blinking Malfunction
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Subwoofer, surround speakers.
Description
ENG - 18
Resolution
-
Check if the power cable attached
to the main Soundbar unit is
connected properly or wait about
5 minutes. If blinking persists, try
manually connecting the
subwoofer and Surround
Speakers. See page 17.
Check if the power cable attached
to the main Soundbar unit is
connected properly.
Connect again. See the
instructions for manual
connection on page 17.
See the contact information for
the Samsung Service Center in
this manual.