Connecting An External Device; Method 1. Connecting Using An Hdmi Cable (Capable Of Dolby Atmos Decoding And Playback) - Samsung HW-Q950T Manuel Complet

Masquer les pouces Voir aussi pour HW-Q950T:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

07 CONNECTING AN EXTERNAL DEVICE

Method 1. Connecting using an HDMI Cable (Capable of Dolby
Atmos decoding and playback)
Pre-connection Checklist
• Dolby Atmos® and DTS:X are supported in HDMI mode only.
• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
• Make sure that the content supports Dolby Atmos®.
External Device
1. Use an HDMI cable to connect the HDMI OUT port on the external device and the HDMI port on the
bottom of the Soundbar.
2. Use an HDMI cable to connect the HDMI IN port of the TV and the HDMI TO TV (eARC/ARC) port on
the bottom of the Soundbar.
3. Turn on the Soundbar, TV, and the external device.
4. Press the
(Multi Function) button on the top of the Soundbar or the
remote control to select "HDMI 1" or "HDMI 2" mode.
5. The Soundbar display indicates that "HDMI 1" or "HDMI 2" mode is currently selected and the
Soundbar will start playing sounds.
Top of the Soundbar
HDMI 1
HDMI 2
HDMI Cable
HDMI OUT
HDMI IN
(ARC)
ENG - 25
OR
OR
HDMI Cable
DIGITAL AUDIO IN
(OPTICAL)
HDMI 2
HDMI 1
HDMI TO TV
(eARC/ARC)
Bottom of the Soundbar
(Source) button on the

Publicité

Chapitres

Table des Matières
loading

Table des Matières