Method 2. Connecting Using An Optical Cable - Samsung HW-S50A Mode D'emploi

Masquer les pouces Voir aussi pour HW-S50A:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47

Method 2. Connecting using an Optical Cable

Pre-connection Checklist
• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
• When you use an optical cable and the terminals have covers, be sure to remove the covers.
1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the
Soundbar and the OPTICAL output port on the TV with the optical cable (not supplied), as shown in
the figure.
2. Turn on the Soundbar and TV.
3. Press the
(Source) button on the top panel or remote control, and then select the "Digital
Audio In" mode.
4. The TV sound is output from the Soundbar.
OPTICAL OUT
White On -> Off
LED
Indicator
Optical Cable
(not supplied)
DC 24V
Top of the Soundbar
ENG - 24
Bottom of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
"Digital Audio In"
SERVICE

Publicité

Table des Matières
loading

Table des Matières