Identification Of Symbols; Know Your Product; General Power Tool Safety Warnings - Weed Eater T100i Manuel D'instructions

• WARNING! This power tool can be dangerous! Careless
or incorrect use can result in serious or fatal injury to the
operator or others. (Picture 1)
• Please read the operator's manual carefully and make
sure you understand the instructions before using the
product. (Picture 2)
• Always wear safety glasses marked Z87. (Picture 3)
• Always wear heavy, long pants, long sleeves, boots, and
gloves. (Picture 4)
• Always wear hearing protection. (Picture 5)
• Secure hair above shoulder length. (Picture 6)
• Remove battery pack before maintenance or cleaning.
(Picture 7)
• Do not expose to rain. (Picture 8)
• Do not wear jewelry, loose clothing, or clothing with
loosely hanging straps, ties, tassels, etc. They can be
caught in moving parts. (Picture 9)
See Picture 16
1. Powerhead
2. Trigger
3. Trigger lockout
4. Rear handle
5. Attachment release button
6. Shaft
7. Assist handle

GENERAL POWER TOOL SAFETY WARNINGS

a WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk
of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.

IDENTIFICATION OF SYMBOLS

KNOW YOUR PRODUCT

SAFETY
• Material may ricochet back toward the operator. (Picture
10)
• Keep children, bystanders, and animals away from work
area a minimum of 50 feet (15 meters) when starting or
operating unit. (Picture 11)
• Direction of rotation. (Picture 12)
• Max speed of output axle, rpm. (Picture 13)
• Use only specifi ed trimmer head, spool, and
recommended trimmer line. Never use blades, fl ailing
devices, wire, rope, string, etc. This attachment is
designed for line trimmer use only. Failure to follow
these instructions may result in serious injury. (Picture
14)
• The product or packaging cannot be handled as
domestic waste. The product and packaging must be
submitted to an appropriate recycling station for the
recovery of electrical and electronic equipment. (Picture
15)
8. Cutting attachment guard
9. Trimmer head
10. Battery pack
11. Charger
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
infl uence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your fi nger on the
switch or energising power tools that have the switch on
invites accidents.
5