Festo DNCKE S Serie Notice D'utilisation page 35

DNCKE−...−S / KEC−...−S
When the drive is fitted in a vertical position:
Check whether external safety measures (e.g. toothed latches or moving bolts)
S
are also required (see ISO 14121, ISO 13849−1).
Select the fitting variant for your application.
S
Further fitting possibilities for Fig. 4 and the necessary accessories are
summarised in the Festo catalogue.
Variants (examples)
With foot mounting type HNC−...
(only for holding)
Fig. 4
Dimensions (see catalogue specifications)
Clamping unit KEC−...
Fig. 5
Festo DNCKE−...−S / KEC−...−S 1002a English
With flange mounting type FNC−...
(also suitable for braking note braking
direction r)
Clamping unit (with cylinder)
type DNCKE−...
35