Germ Guardian AC5000 Mode D'emploi page 5

INSTAllING/REMoVING CoMbINATIoN FIlTER
1. Turn off and unplug the unit.
2. Press the Lock & Release Button and remove the Rear Cover from the unit.
3. Remove the used Combination Filter and dispose of it in the garbage.
4. Insert new Combination Filter into the unit. Consult the arrow on the filter for
correct installation direction.
5. Reattach the Rear Cover of the unit and securely latch into place.
E-8
INSTAllING & REMoVING UV-C bUlb
INSTAllING & REMoVING UV-C bUlb
1. Remove the Rear Cover of the unit by pushing Lock & Release Button (Fig. 1).
2. After removing the Rear Cover from the unit, remove the Combination Filter (Fig. 2).
3. After removing the Combination Filter, use a Philips head screwdriver to remove four (4)
screws and detach the Bulb Cover (Fig. 3).
FIG. 1
FIG. 2
FIG. 3
E-9