Adventys BRIC Guide D'utilisation page 24

Comment fonctionne votre tpptreili
Control of the pan quality
For controling the pan quality. The product must be in power mode with display in watts mode. Place a pan full of
water on the cooktop and select the full power setting (3000 or 3600W) then press « P1 » and « P2 » simulta-
neously: the actual consumption appears on the display which also indicates the quality of the pan.
Modeli 3000W:
If the power diplayed is:
- higher than 2400W : The quality of the pan is good.
- Between 2000W and 2400W : the quality of the pan is average.
- Less than 2000W : the quality of the pan is poor.
Modeli 3600W:
If the power diplayed is:
- higher than 2900W : The quality of the pan is good.
- Between 2200W and2900W : the quality of the pan is average.
- Less than 2200W : the quality of the pan is poor.
This measure can vary according to the operating life of the product before the measure, the temperature of the
room, or the load of the pan.
A pan with a poor quality lead overheating and a loss of efficiency of the device.
Diaplity of apecific meaatge
The device is extremely safe. It makes a permanent control of the values of temperature and other electric para-
meters to guarantee to the user the best level of performance and safety at every moment.
A flashing error code « Fx » can appear on the display to warn about a malfunctioning.
The code error flashing is effective as long as the user doesn't stop the device manuallyunplug and replug the
unit, and then relaunch the device using the « On/Off » touch.
If a code error becomes permanent without having the possibility of cancelling it by trying to relaunch the device,
it is advised to get in touch with the after-sales service specified by the retailer of the product.
24