Gecko Aeware in.clear Mode D'emploi page 8

in.clear
™
Warnings!
Important safety instructions
• The unit must be installed in a location that is inaccessible to a person
in the bath or spa and must be located or fixed so that it cannot fall
into the bath or spa.
• The unit is not designed to be submersed but may be installed
underneath the waterproof skirt of the spa.
• A means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
• To reduce the risk of injury, do not allow children to operate
this device.
• It is the responsibility of the user to test the spa water regularly to
ensure that adequate amounts of bromine are generated to achieve
proper sanitizer levels.
• Heavy spa usage may require higher bromine output to maintain
proper free available bromine residuals.
• The expected life time of the electrodes is 30 000 hours when used
in normal operating conditions.
• Maintaining overly high Sodium Bromide and bromine levels above
recommended range can contribute to corrosion of spa equipment
and may damage components of the spa.
•The cell is installed after the heater in the circulation pump line.
• Do NOT use any ozone or UV sanitizer.
• Check the expiry date of the test kit as test results may be inaccurate
if used after that date.
• Follow all aspects of the local and National Electrical Code(s) when
installing the in.clear Automatic Bromine Generator.
• People with a medical condition should consult a physician before
entering spa water.
• Women who are pregnant should NOT enter the spa.
• Maximum spa water usage temperature is 40°C. Bathing in spa water
at 40°C should not exceed 15 minutes.
• For proper sanitation, spa must be completely drained periodically.
The number of days between COMPLETE SPA DRAINAGE is equal
to the volume of the spa water in liters, divided by 10 times the
maximum number of daily spa users.
• Refill spa with water and repeat DIRECTION FOR USE of the device.
- For a 1500 liters (400 US gallons) spa used by 2 adults twice a week:
1500 / (10 x (4/7)) = 262 days or 8 months
• In.clear is meant for a covered spa NOT swimming pools.
• Users should always shower before entering a spa.
warnings
7