Gecko Aeware in.clear Mode D'emploi page 20

in.clear
™
3 - Adjusting water chemistry in the spa
Proper chemical maintenance of a spa is essential for the health of
bathers. Maintaining the quality of the spa water within these specified
values will enhance your enjoyment of the spa and prolong the life of
the in.clear system.
For best results, adjust to the following water chemistry parameters.
Check these parameters periodicaly.
Calcium hardness (TH): between 150 and 200 PPM
Total Alkalinity: between 100 and 120 PPM
pH: between 7 .2 and 7 .8
Water chemistry should be balanced before adding
sodium bromide into the water. It's essential that the water
chemistry parameters are within the proposed range to
obtain optimal system performance.
High Calcium Hardness may lead to faster calcification of
the electrolytic plates.
4 - Adding
Sodium Bromide (such as BromiCharge)
Water temperature between 32 and 38° C (90 and 100° F)
helps dissolve sodium bromide and facilitates the adjustment of the
maintenance level.
Start the pump to allow water to circulate and slowly add sodium
bromide (such as BromiCharge) uniformly in the spa by simply pouring
it from the container.
getting started
19