Gecko Aeware in.clear Mode D'emploi page 43

user guide for BromiCharge
DIRECTIONS FOR USE
For Spas ONLY (Not for swimming pool use)
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
BromiCharge is designed to be
used in conjunction with in.clear
water sanitation system for spas
and hot tubs (with BROMITRON
BROMINE GENERATOR
technology), an electrolysis
unit that converts bromide into
hypobromite solution. The
produced hypo-bromite solution
(bromine) is then introduced into
the spa to be treated as a sanitizer
for spa water.
BromiCharge DOSAGE:
42
Upon dumping of spa water,
every 60 days add 1.2 pounds of
BromiCharge per 100 U.S. gallons
of spa water to a spa equipped
with in.clear water sanitation
system (with BROMITRON
BROMINE GENERATOR). This
will establish sufficient bromide
reserve for the bromine generator
to operate properly. This same
treatment should be followed
every 60 days upon draining and
refilling the spa with fresh water.
MAINTENANCE:
An in.clear water sanitation
system (with BROMITRON
BROMINE GENERATOR) will
operate to produce bromine
as designed until the bromide
reserve drops below required
levels. BromiCharge should
be added if the bromide level
drops below 10-30% of the initial
charge. Dilution, splash out
and leaks are primary reasons
for the bromide level to drop.
If the bromine generator does
not produce enough bromine
make sure the recommended
level of 1440 PPM is still present
in the spa water. The level can be
tested with a TDS meter (Total
Dissolved Solids), or by taking a
water sample to a spa/pool store.
If BromiCharge is being added
repeatedly the spa should be
checked for leaks.
Before entering the spa, the
bromine level should be tested.
in.clear
The bromine level should be
maintained between 2-5 PPM
and can be tested with a DPD
test kit, or Bromine test strips,
found at any spa/pool store.
The bromine generator only
produces bromine when the
spa is circulating. For more
immediate results, dilution
with fresh water will lower the
bromine level.
™