Installation; Reader; Wind Sensor - Vetus WSD834 Manuel D'utilisation Et Instructions D'installation

Use the or but-
ton to set the correct
ship's speed.
The original value
can always be reset
by pressing the
LIGHT (RESET) but-
ton.
Confirm the calibra-
tion by holding the
SET button pressed
in for 2 sec.
The screen will return
to the standard dis-
play.
26
10.0312
WSD834M110
WSD834M111
WSD834M107

5 Installation

5 .1 Meter
For dimensions, see Section 11.
Using the template provided, cut out openings
in the instrument panel or bulkhead. Attach
the meter using the 4 threaded rods and nuts
provided. Ensure that the seal sits correctly
between the meter and the panel or bulkhead.

5 .2 Wind sensor

For dimensions, see Section 11.
Wind speed/ wind direction indicator WSD834