USRobotics 9114 Guide D'installation Rapide page 8

English
2. Connect the router to your computer:.
A. Power off your computer
B. Connect one end of the supplied
Ethernet cable to your computer's
Ethernet adapter.
C. Connect the other end the
router's
LAN
3. Power up the network:
A. Connect the supplied power
adapter to the
the router.
B. Plug the power adapter into a
standard power outlet.
C. Turn on your computer.
Step Three: Configure Your Router
Using EasyConfigruator
You will need active ADSL and Internet service from your local telephone company or
Internet Service Provider (ISP) before you try to go on the Internet. You may need some
of the following information from your ISP:
!
VPI/VCI values
!
Authentication (PAP or CHAP) for PPP connections
!
IP address, user name and password (if they were assigned by your ISP)
!
Subnet mask, gateway, and DNS server information
1. Insert the USRobotics Installation CD-ROM into your computer's CD or DVD
ROM drive and do one of the following:
"
Windows:
A. If the CD doesn't start automatically, start it manually as follows:
1) Windows Vista: Click Windows
4
port.
port on
9VDC
!
Encapsulation mode
3.3VDC
Reset
3.3VDC
Reset
!
Protocol type
> .
Start Computer