Technical Specifications; Accessories Provided - Urmet 1099/205 Guide Rapide

EN
Precautions
• Make sure that the device is intact after removing it from the package.
• Disconnect the device from the mains before cleaning or maintenance. Do not use spray products to clean the
device.
• Check that the working temperature is within the indicated range and that the environment is not particularly
humid.
• If installed in outdoor, don't expose it to direct rain or high temperatures.
• Disconnect power by means of the circuit breaker in the event of a failure and/or bad operation.
• The device can only be opened by qualified technical personnel.
• Exclusively contact an authorised service centre for repairs.

Technical specifications

Sensor type:
Sensitive elements:
Lens:
Resolution:
IR CUT FILTER:
Synchronization:
Shutter control:
Back-lighting compensation:
White balancing:
Gain control:
Sensitivity:
LED number:
Range:
Power supply:
Max consumption:
Connectors:
Protection grade:
Operating temperature range:
Dimensions (Ø x L):
Weight:
* Important note:
ACCESSORIES PROVIDED: Instruction manual.
* Important note: Accessories may be changed without prior notice.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, URMET S.p.A. declares that the radio equipment type: camera 1099/205 is in compliance with Directive
2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com
DS1099-001A
2.0 MegaPixel 1/2.7" Color CMOS
1920 pixel (H) x 1080 pixel (V)
4 mm
1080p@25fps
YES
Internal
1/25 ~ 1/10.000 sec (AUTO)
AUTO
AUTO
AUTO
0,03 Lux @(F1.2,AGC ON) - 0 LUX IR ON
18pcs
20 m
12 VCC (+/-10%)
≤ 4.2W
Connectors: Power jack + button for pairing camera to WiFi NVR
IP66
-10 to +50°C
69.3 x 147.3 mm
280 gr
Technical features may be changed without prior notice.
4