Eaton ATC-300 Mode D'emploi page 40

Instruction Booklet
Page 40 Effective: January 2006
This instruction booklet is published
solely for information purposes and
should not be considered all-inclusive.
If further information is required, you
should consult EATON.
Sale of product shown in this literature
is subject to terms and conditions out-
lined in appropriate EATON selling poli-
cies or other contractual agreement
between the parties. This literature is
not intended to and does not enlarge or
add to any such contract. The sole
source governing the rights and reme-
dies of any purchaser of this equipment
is the contract between the purchaser
and EATON.
NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING WARRANTIES
OF FITNESS FOR A PARTICULAR PUR-
POSE OR MERCHANTABILITY, OR
WARRANTIES ARISING FROM
COURSE OF DEALING OR USAGE OF
TRADE, ARE MADE REGARDING THE
INFORMATION, RECOMMENDATIONS
AND DESCRIPTIONS CONTAINED
HEREIN. In no event will EATON be
responsible to the purchaser or user in
contract, in tort (including negligence),
strict liability or otherwise for any spe-
cial, indirect, incidental or consequen-
tial damage or loss whatsoever,
including but not limited to damage or
loss of use of equipment, plant or
power system, cost of capital, loss of
power, additional expenses in the use
of existing power facilities, or claims
against the purchaser or user by its
customers resulting from the use of the
information, recommendations and
description contained herein.
EATON Electrical Inc.
1000 Cherrington Parkway
Moon Township, PA 15108-4312l
U.S.A.
tel: 1-800-525-2000
www.eatonelectrical.com
ATC-300 Automatic
Transfer Switch
Controller
© 2006 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. IB01602001T/TBG00101
January 2006