Table des Matières
Publicité
1
2
4
2
3
3
2
1
1
EN
-
The patented 'Click & Go' assembly system of your new food
1
processor allows you to assemble and disassemble your food
processor in a very easy and safe way.Thanks to the flower-shaped
rims, the bowl and the lid can be easily and securely attached in
any position.
-
The lid can be easily disconnected by pressing the Click & Go
button in the centre of the lid.
-
When using the appliance, make sure that the Click & Go button
has been screwed into the lid properly to prevent ingredients from
entering the Click & Go system.
-
Built-in safety lock:This feature ensures that you can only switch the
appliance on when the accessories have been placed on the motor
unit in the correct position and the blender cap has been placed on
the motor unit when the blender is not being used (see picture). In
addition, when using the bowl, you can only switch the appliance on
if you have secured the lid by clicking it onto the bowl.When all
parts have been assembled correctly, the built-in safety lock will be
unlocked.
Always clean the lid and the Click & Go button after use,
preferably immediately. See chapter 'Cleaning' for instructions on
how to take the Click & Go system apart in order to clean it.
Note that it is not possible to use the food-processing functions when
B
the blender is attached to the motor unit!
FR
|
-
Le système breveté Click & Go de votre nouveau robot de cuisine
vous permet de monter et démonter l'appareil facilement et en
toute sécurité. Grâce aux rebords dentelés, le bol et le couvercle
peuvent être fixés aisément en toute position.
-
Le couvercle peut être facilement retiré en appuyant sur le bouton
Click & Go au centre du couvercle.
-
Lorsque vous utilisez le bol, assurez-vous que le bouton Click & Go
a été vissé correctement sur le couvercle pour éviter que les
ingrédients entrent dans le système Click & Go.
|
Click & Go system - tips and warnings
Système Click & Go - suggestions et avertissements
Cucina
11
Publicité
Table des Matières
