Guidance Information; About These Instructions; Original Instructions; Identification Of Safety Instructions - Wilo Yonos MAXO Notice De Montage Et De Mise En Service

en
1

Guidance information

1.1

About these instructions

These instructions enable the safe installation and initial commis-
sioning of the pump.
ƒ
Read these instructions before commencing work and keep
them in an accessible place at all times.
ƒ
Observe instructions and labelling on the pump.
ƒ
Observe local regulations where the pump is installed.
ƒ
Follow the detailed instructions online.
➜ See QR code
1.2

Original instructions

The German language version represents the original instructions.
All other language versions are translations of the original instruc-
tions.
1.3

Identification of safety instructions

These installation and operating instructions set out safety instruc-
tions for preventing personal injury and damage to property, which
are displayed in different ways:
ƒ
Safety instructions relating to personal injury start with a signal
word and are preceded by a corresponding symbol.
ƒ
Safety instructions relating to property damage start with a
signal word and are displayed without a symbol.
18
Signal words
ƒ
DANGER!
Failure to follow the instructions will result in serious injury or
death!
ƒ
WARNING!
Failure to follow instructions can lead to (serious) injury!
ƒ
CAUTION!
Failure to follow instructions can lead to property damage and
possible total loss.
ƒ
NOTICE!
Useful information on handling the product
Symbols
These instructions use the following symbols:
General danger symbol
Danger of electric voltage
Warning of hot surfaces
Warning of magnetic fields
Notices
WILO SE 2022-03