Preparation; Adjust The Volume - NGS Technology Box Manuel De L'utilisateur

Operations

PREPARATION

Power on the TV set and select video input mode.
GET STARTED
1. Turn on the player and adjust the FUNCTION
control to DVD for BOX model or DVD/DVB for
BOX TV model. and press DVD/DVB or MODE but-
ton to select DVD play mode.
2. Open the disc tray.
3. Place a disc onto the disc tray.
4. Close the disc tray and the playback starts
automatically.
5. When a menu screen appears on the TV, move
the navigation buttons or press the numeric but-
tons to select a preferred track number to start
playback.

ADJUST THE VOLUME

Adjust the volume to your favorite by rotating the
volume control.
SKIP AHEAD OR BACK
Press NEXT SKIP or PREV SKIP button once during
play to skip a chapter(DVD) or a track (CD) ahead
or backwards.
RAPID ADVANCE/ REVERSE
During playback, press F .FWD button or F . BWD
button several times to scan the disc forward or
backward at X2, X4, X8, X20 normal speed.
Press PLAY button to resume normal play.
PAUSE/STEP PLAY
Press PAUSE/STEP button during playback to pause.
during pause mode, each time the PAUSE/STEP
button is pressed, the player will only play one
frame; to resume normal play, press PLAY button.
STOP PLAYBACK
Press STOP button during playback to stop play-
back; the player activates its resume function
when STOP is pressed in PLAY mode; press PLAY
button again, playback resumes at the point it
stopped previously; open the disc tray or press the
STOP button one more time to clear the resume
function.
8
SLOW-MOTION PLAY (DVD)
Press SLOW button on the remote control during
playback, the disc will be played at 1/ 2 normal
speed at first, each time this button is pressed,
the play speed becomes slower (down to 1/7
normal speed.) Press PLAY button, normal play will
resume.
REPEAT
Press REPEAT 1/all button during play, it will repeat
play one chapter/title or repeat all (for DVD disc),
or repeat play a track or all tracks (for CD), or
repeat the specified points (A-B).
SEARCH FOR PREFERRED SCENE
1. Press SEARCH button during play and highlight
the item to be played (Title, Chapter, or Chapter
time)by navigation buttons.
2. Input the desired number or time via the
numeric buttons.
3. Press ENTER button to confirm and the playback
from the located scene starts.
4.To exit search menu, press SEARCH button
directly.
Note: during DVB play mode, press SEARCH button to
auto searching the TV channels directly.
PROGRAM PLAY
(UP TO 16 MEMORIES)
1. Press PROGRAM/EPG during playback to display
the program menu.
2. Select location(s) to be memorized via naviga-
tion buttons and then enter desired Titles/
Chapters numbers via numeric buttons.
Note: Inputting leading zero is not necessary. If the
chapter/title/track number is behind the cardi-
nal 10, press the +10 first and then another unit
digit. Some figure inputs may be useless, because
it's greater figure than total title/chapter/track
number on the disc. Example:
Track 3, press "3"
Track 12, press "+10" and then "2"
Track 21, press "+10" twice, and then "1"
3. To start programmed playback, select PLAY
on the menu and press SELECT button on the
remote control; pressing PROGRAM button again
to exit programming.