NGS Technology Box Manuel De L'utilisateur page 14

Troubleshooting
If your DVD player does not seem to be functioning properly, check the items below before you contact an
authorized service center.
SYMPTOM
Power does not turn on or
suddenly turns off.
Battery pack is in place but
the power does not turn on
or suddenly turns off.
Remote control won't work.
No picture or sound.
No picture.
No sound.
No picture and sound.
Distorted video or sound
Image is unclear or distorted.
No image or image is black
and white.
14
CHECK
∙ Make sure the AC cord is securely plugged into AC socket and an AC
outlet.
∙ Turn the power off and then back on.
∙ Check that the battery pack is charged. If not, recharge it.
∙ Check that the battery is inserted in the Direction properly.
∙ The battery may be flat. Replace it with a new one.
∙ Check that the signal transmission is directed at the remote control
sensor on the DVD player.
∙ Remove the obstacle between the remote controller and remote
control sensor.
∙ Check that the A/V cables are securely connected.
∙ Check that the disc is a DVD (region number 1 or all), DVD-RW or
AUDIO CD.
∙ Do not use a disc that has scratches or dirt.
∙ Check that the label-side of the disc is facing up.
∙ The pick-up lens of the DVD player may be dirty. Contact the service
center for lens cleaning.
∙ Check that the TV channel is set to VIDEO or AV if viewing with a TV.
∙ Check image brightness and contrast settings.
∙ Check if TV signal is strong or not.
∙ Check that the LCD display is turned on.
∙ Check the volume setting. If set to zero, turn up volume level.
∙ Check that the headphones are plugged into the PHONES socket.
Speakers cannot be used with the headphones.
∙ Check that the battery is properly installed and AC cord is properly
connected.
∙ Use a disc without scratches or dents.
∙ Check the direction, position and connection of the antenna.
∙ Adjust color settings.
∙ Check color settings.