System Settings - NGS Technology Box Manuel De L'utilisateur

User's Manual

System Settings

Initial settings page is for you to make your pre-
ferred settings up for your player. Once the initial
settings are done they are retained in the CPU of
the player until otherwise modified.
COMMON PROCEDURES FOR
INITIAL SETTINGS
1. Press SETUP button.
2. Use the navigation buttons to select the item
you want to modify, setting page with further
setting items displayed shows on the TV screen.
Again use navigation buttons to make changes.
Press OK/SELECT button to confirm modifica-
tions.
3. Use navigation buttons to switch to another set-
ting on the main setting page.
4. Press SETUP button to exit main setting page.
1. SYSTEM SETUP
∙ TV SYSTEM - it is used to select the TV mode.
Options: NTSC, PAL, AUTO. Please select this
option as per your TV set.
∙ SCREEN SAVER - when the play is not used for
several minutes, a running DVD logo will move
across the TV screen to protect it. Options:
ON: screen saver is enabled
OFF: screen saver is disabled.
∙ TV TYPE - it is used to select the TV scan mode,
please set as per your TV set. Options:
4:3PS : Normal Pan & scan mode
4:3LB : Normal Letter box mode
16:9 : 16:9 wide screen mode
∙ PASSWORD - input password to unlock the sys-
tem. The steps are as follows:
1. Enter SYSTEM SETUP , select the PASSWORD item
by scrolling the down navigation button, and
then press the right navigation button to select
the input box.
2. Input user's password "0000" to unlock it, in
this case, select the input box again to change
the password by inputing another new four
numeric numbers and then press ENTER button
to confirm. When the password is changed, you
are needed to input the new one to unlock the
system.
3. Once you forget your own password, use the
supervisor's password "8200" to unlock it.
NOTE: If wrong password was input in unlock status, the
system will lock.
∙ RATING - Set the rating of this player. If you want
to change the rating of parental lock, please
input the password to unlock first. Options: 1 KID
SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R / 6 R /7
NC-17 / 8 ADULT
∙ DEFAULT - Reset to factory settings. Options:
RESTORE
∙ EXIT SETUP - Select it to exit the setup menu.
2. LANGUAGE SETUP
∙ OSD LANGUAGE - It is used to select different On
Screen Display language for different user.
∙ AUDIO LANG - select preferred audio language.
(DVD only, need disc software support)
∙ SUBTITLE LANG - Select preferred subtitle lan-
guage. (DVD only, need disc software support)
∙ MENU LANG - Select preferred disc menu lan-
guage. (DVD only, need disc software support)
∙ EXIT SETUP - Select it to exit the setup menu.
3. VIDEO SETUP
∙ BRIGHTNESS - to set the brightness for the
display. Options: 0/2/4/6/8/10/12
∙ CONTRAST - to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
∙ HUE - to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
∙ SATURATION - to set the saturation level for
display. Options: 0/2/4/6/8/10/12
∙ EXIT SETUP - Select it to exit the setup menu.
4. SPEAKER SETUP
∙ DOWNMIX - Options:
LT/RT- Left/Right mix mode
STEREO- Stereo mode
∙ EXIT SETUP - Select it to exit the setup menu.
DISPLAY ON/OFF SWITCH
Slide TFT on/off switch to turn on or turn off the
TFT screen during playback.
English
11