Samsung DW60R2014 Serie Mode D'emploi page 26

Using your dishwasher
Adjusting the amount of rinse aid
You can adjust the amount of rinse aid used by following the instructions below. Generally.
the higher the setting, the better the drying performance.
1. Turn on the dishwasher.
2. Press the Express 60 (DW60R2014AP) or Cycles (DW60R2014US) button for five
seconds within 60 seconds of turning on the dishwasher.
3. The LED display shows the current rinse level. (between d1-d5)
4. Press the Express 60 (DW60R2014AP) or Cycles (DW60R2014US) button to select the
amount of rinse aid you want. Each time you press the button, the setting will change in
the following sequence.
- d1 > d2 > d3 > d4 > d5 > d1. (The default level is d5.)
5. Select the amount of rinse aid, and then wait 5 seconds or turn off the dishwasher for
the setup to complete.
26 English
DW60R2014(A5)_IB_DD81-02706A-00_EN.indd 26 2019-02-12 11:45:39