Hamilton Beach Set 'n Forget 5 Mode D'emploi page 8

840161402 ENnv03.qxd 11/30/07
Probe Mode
Setting Temp
Time Temp
GRAM MANUAL PROBE
ENTER
Cooking Heat Desired Actual
Time Setting Temp
8
Press ENTER. COOK will display
and 3 second beep will sound.
NOTE: Unit will automatically start
in 20 seconds if ENTER is not
pressed.
To monitor temperature after food is cooked:
1. Press OFF (if not already off), then press ON.
2. Press PROBE. Heat setting will be illuminated.
3. Press arrows to select WARM.
4. Press ENTER. WARM will display and 3 second beep will sound.
NOTE: The unit will automatically start in 20 seconds if ENTER is not
pressed. Display will alternate between WARM and actual temperature.
The unit will turn off and display OFF after a total of 14 hours.
8
9:50 AM Page 8
(cont)
Temp
9
Display will alternate between
actual temperature and the
temperature selected.
10
When selected temperature is
reached, the unit will switch to
Warm and display WARM
constantly.
11
The unit will turn off and display
OFF after a total of 14 hours.